Rsr black adjustable regulator vw opel ford vr6 16v g60 g40 turbo opc. This product page has been automatically translated. If you have questions, feel free to contact us. Pressure regulator material: aluminum high strength / black Speed: 20 - 400 l / h adjustment range: 0-8 bar connections: 3 x 1/8 npt, 1 x 4-5 mm vacuum hose connections: 2 x 8 mm and 2 x an6 (dash6) enrichment: 1: 1 weight: 180 grams.The use of the vehicle list is only a sample and should not be 100% correct. For vehicles with a bzd controller in the tank and without return to the fuel rail, the return must be retrofitted when using the controller. Pressure regulator universal adjustable black fuel, is provided as parts and can be assembled depending on the application and desire, instructions are included. The controller consists of: 1 x screw cap 1/8 npt 2 x 8 mm pipe coupling with a connecting thread 1/8 npt 2 x an6 connecting pipe (dash6) with connecting thread 1/1 x 8NPT support fuel pressure regulator 1 x sealing tape for connecting screw with 1/8 npt 1 x instructions pressure regulator gasoline \and an outlet for the fuel, an adjusting screw for adjusting the pressure of fuel and a multi-sealed rotary vacuum connection 360 is located in the middle above the membrane. With multiple sealing, no losses (leaks) through the adjusting screw!
If it should leak, the engine would become leaner as the full-load enrichment is no longer working properly, which can damage the engine! The central position of the vacuum fitting ensures optimum distribution of pressure on the membrane. The controller optimized membrane which is not comparable to the simple controllers that work with a plastic membrane, the membrane offers the following advantages: - small compact design, much faster to respond to pressure changes (changes in load, load partial / full load) - reduced pressure peaks, protects the fuel pump - low pressure fluctuation in the injection rail, optimum injection pressure - the characteristic curve / enrichment is comparable controllers bosch the second fuel inlet (1/8 npt) can be used for a pressure gauge, a pressure sensor for electronic displays fuel pressure or pressure sensors freely programmable injection systems may be used.
Fuel pressure / injection quantity can be optimally adjusted with pressure regulator, so that the max. If you have questions about these or other parts, send a message. Pressure regulator fuel pressure regulator of the material: aluminum high strength / black Speed: 20 - 400 l / h adjustment range: 0-8 bar connections: 3 x 1/8 npt, 1 x 4-5 mm vacuum connections pipes: 2 x 2 x 8 mm and an6 (dash6) enrichment: 1: 1 weight: 180 grams controller consists of: 1 x screw cap 1/8 npt 2 x hose connection 8 mm with connecting thread 1 / 8 npt 2 x connection pipe an6 (dash6) with connecting thread 1/1 x 8NPT support for fuel pressure regulator 1 x sealing tape for connecting screw with 1/8 npt 1 x instructions - small compact design, so much faster - reducing pressure peaks, protects p. 3 x 1/8 npt, 1 x Unterdruck 4-5mm. 2 x 8mm, 2 x an6 (dash 6).The item \\other\The seller is \This article can be shipped worldwide.